EnglishArabicBulgarianHindiFrench



Contact Us

Prisms India Private Limited

Phone : +91-413-2277059

Mobile : +91-9843044707

Prisms India Private Limited

Spindle Target



We offer Spindle Target of fine quality. Spindle Target is used for mounting and aligning the spindle and bore rotation axis. Spindle Targets are special purpose mounted reticule targets. The reticule may be a cross line on a Mirror or on a beamsplitter. In Autocollimator application the mirror surface is used to measure angular tilts. In Alignment Telescope application the target cross line reticule is used for measurement of linear shifts. Our Spindle Target is precisely manufactured using the premium grade raw material that is sourced from known and reliable dealers. Additionally, it is being presented at the best rates in the industry.
 
Spindle Targets are special purpose mounted reticule targets. The reticule is a cross line on a Mirror. In Autocollimator application the mirror surface is used to measure angular tilts. In Alignment Telescope application the target cross line reticule is used for measurement of linear shifts.

Two adjustment screws are provided for linear movement of the Reticule to center the reticule to the axis of rotation.

Three leveling screws are provided for tilting the mirror surface for aligning the surface perpendicular to the axis of rotation.

Types of target
1) 25 mm dia Front Surface Mirror
2) 25 mm dia Front Surface Mirror with 10 microns width cross line
3) 25 mm dia cross line (Parallelism < 2 arc secs)
4) 25 mm Beam splitter with 10 microns width cross line (Parallelism < 2 arc secs)